Video surveillance for a private house. Modern security systems for a private house The best alarm systems for a house

In order to keep your apartment or house safe and sound, you should install a video surveillance system. You should choose one that serves as an excellent protection against penetration. However, despite the simplicity of such a task, there are some difficulties. And the most important thing is the impossibility of responding. For example, if a thief steals something, it cannot be prevented, it can only be corrected. It was in order not to catch the thief at the crime scene that security gsm systems were created. Simplicity and, at the same time, efficiency of management allow timely notification and response.

Features and main functions of the GSM security system for summer cottages

The distinguishing features of home systems with a gsm module include the following points:

  • Modernity and increased functionality of all equipment.
  • Existence of ultrahigh protection against illegal penetration.
  • All work is based on the location of the sensors.
  • You can put your house on guard even at a distance.

The burglary warning comes in the form of a short message to the phone or with a short call.

The main functions will be:

  • Full control of the premises with the possibility of using different types of alarms.
  • Automatic sending of an alarm signal to the owner's phone or private security console.
  • Checking the operation of some devices for water, gas and power supply.
  • Connect a microphone to listen to all sounds indoors and outdoors.
  • Possibility to make photo and video registration from the whole house.

On the video - security gsm systems for a private house or cottage:

In other words, the gsm system completely monitors the entire situation inside and outside the house.

Overview and varieties of models

There is a classification of types of gsm systems:

  1. By type of security.
  2. By the presence of executing devices.
  3. By the name of the sensors.
  4. By connection type.
  5. By way of notification.

By type of security

  • fire department
  • security
  • mixed

fire system

It is aimed at sending a signal only in the event of a fire or the slightest sign of smoke. Especially popular.

The system is necessary when there is always someone at home, but the possibility of a fire is high.

Security system

Designed to install security both inside the house and on the outskirts of it. This is an excellent solution when no one is at home and control of the situation is required. With the help of special devices, you can prevent any penetration into the house. He will tell you about a video intercom for a private house with an electromechanical lock.

mixed

Includes both security and smoke warning. The best option, as it allows you to prevent absolutely any situation in the house and on the street.

Components: key fob, motion sensors, remote control

The key fob allows you to activate or deactivate the system. It has only one or two buttons and is convenient to carry with you all the time.

The signal range reaches several meters. It can be conventional and remote control. The last one can turn on and off the alarm at a great distance.

The control panel allows you to configure the operation of the entire system, make changes to it or switch the mode.

The following categories of sensors exist:

  • The sensors are magnetic.
  • Vibration triggered.
  • Ultrasonic.
  • Radio wave.
  • Electrosensors with the possibility of photographing.
  • Detectors of glass integrity violations.
  • infrared detectors.
  • Panic buttons.

On the video - the best gsm alarm system for the home (review):

Magnetic sensors responsible for controlling the position of windows and doors. There are two types: external and hidden. The former are visible to any person, while the latter remain invisible. They consist of a magnet and a reed switch. Find out about a video recorder with a motion sensor for your home.

Vibration sensors respond to an attempt to cause damage to the outer walls of the building. Their reaction is carried out before the intruder enters the territory of the house.

Ultrasonic sensors react to the slightest rustle and immediately give an alarm signal. In their case, you can make adjustments to which sounds are safe.

radio wave able to intercept any signal, including the movement of strangers on the territory of the house.

Electrical sensors have a non-contact application. They securely block all doors in the house, as well as gates. They equally effectively protect the external territory and internal from any illegal entry.

Glass integrity detectors react to the slightest fluctuations of windows. Sending an alarm signal is carried out after breaking the glass.

Infrared detectors respond to human radiation. The most perfect and error-free surveillance and warning system. Remaining unnoticed, she will promptly warn the owner about the penetration of a stranger into the territory.

By connection type

Wired fastened with wires and cables, and the second does all the work through signal transmission. A wired connection with, despite its visibility, is completely protected from radio interference and does not slow down the operation of the entire system.

By notification method

  • sms message
  • call

SMS simply sends an alert to the owner and a few people.

Self-manufacturing

If there is no money for such a system, you can build it yourself. This requires the presence of an old push-button telephone, a magnet, a reed switch, wires and a switch. Further work goes like this:

  1. To begin with, a speed dial is set up, consisting of the owner's number and several people - if desired - using one of the buttons.
  2. Next comes the complete disassembly of the phone to the motherboard.
  3. In case of the same end and call in the form of one button, one end of the wire is soldered to it, and the other to the digital panel.
  4. If these buttons are different, then another end of the wire is soldered to it.
  5. For each wire, a reed switch with three contacts is used.
  6. A magnet is installed on the door and a reed switch is adjusted.
  7. In order for the intrusion signal to reach the addressee, it is necessary to install a magnet so that it reacts to the opening of the door by strangers.
  8. Disabling the alarm is carried out using a switch.
  9. It is necessary to charge the phone in time. It is best to do this while the owners are present, since the alarm remains off during charging.

Video: installing a good do-it-yourself home alarm

On the video - do-it-yourself gsm alarm for the house:

Manufacturers and prices

The largest manufacturers include the following:


The cost of Crow Swan products is from 600 to 800 rubles.

In order to choose the best alarm system for yourself, you need to pay attention to the following criteria:

  1. Is it ideal value for money. The cost should be medium to high.
  2. Availability of technical capabilities and additional functions.
  3. Signal transmission power.
  4. How the body is made.
  5. Areas of use.

Control over the current situation inside the house implies not only the protection of the living space, but also the control of heating systems, water heating, air conditioning, some household electrical appliances, gas supply, etc. The deployed gsm alarm system for the home includes a diverse range of devices that can implement any level of control from the simplest to the Smart Home system.

Home gsm alarm systems

Sets of security gsm alarms for houses and cottages, apartments - security, fire-fighting devices that notify of an alarm situation using a cellular communication channel. A SIM card of any operator is installed in the module. When registering signs of unauthorized entry, smoke, water leakage, etc. the control device sends a text message to the object owner. When a video is connected, a number is dialed, by answering which it is possible to view the current situation online.

It is possible to connect several mobile numbers to one receiving device, which will simultaneously receive an alarm message. This allows you to quickly respond in an emergency, resort to the help of law enforcement agencies if necessary.

Standard configurations include the presence of a receiving module, motion sensors, door opening, remote controls, sometimes an external antenna, and a backup power supply. At the same time, these systems have the possibility of additional installation of the necessary sensors to control the premises.

If you wish, you can make a security complex for your home with your own hands.

How to choose a gsm alarm for protection

The determining factor on which an alarm system for a living space is often chosen is cost. The price indicator depends on many parameters of the complex: capacitive installation volume of additional equipment, functionality, wireless connection, etc.

Asking how to choose, first of all, it should be based on the needs of the current moment. It is enough to equip small rooms, apartments with a standard basic complex with a motion sensor, door opening. If necessary, they can be supplemented with smoke sensors, temperature rise, water leakage, glass breaking, video camera. The amount of additional equipment is determined by the capabilities of the receiving module.

In addition, it is possible to install temperature sensors to control heating equipment, air conditioning, and other household appliances that support this option.

Security systems can be wired or wireless. A wired gsm alarm costs less, but installation will take more effort, time, and cables will need to be laid to all sensors. A wireless complex with a gsm module is more expensive, it is easier to install, there are no problems with wiring, their vulnerability to external influences.

Fire alarm

Often combined with a burglar alarm with a fire alarm. This is convenient, since the control is carried out using a single control device. A separate fire system is rarely equipped. To connect, you also need a receiving device, to which the sensors send an information signal.

The type of sensor is determined by the specifics of the room. Often a smoke detector is installed that reacts to an increase in the optical density of the air. Thermal, flame sensing devices can also be used.

A fire alarm for a house with a cellular communication module operates on the same principle as a security one.

Wireless gsm alarm system: complex for home security

Advantages of wireless signaling for private living space: autonomy, independence from electrical energy, trouble-free installation, simple maintenance once a year when changing the batteries of sensor devices.

The gsm wifi alarm uses the Internet to transmit data about the current state of the object, as well as the cellular network channel. Does not require large Internet traffic, does not depend on the quality of mobile communications. Such devices include Strazh Smart GSM. In addition, the security complex can operate at low temperatures (down to -40⁰ C). Other features of the wireless wi fi system:

  • Low battery alert;
  • The presence of a backup power supply;
  • Anti-vandal protection of the receiving unit;
  • Connecting 3 numbers to one module;
  • Internet, cellular signal loss warning;
  • Delayed arming, disarming.

Strazh Smart GSM is a new generation equipment. Most systems use cellular. Internet-enabled devices include, for example, a gsm alarm system for a private house ZTA 110.

Zont ZTA 110 for protection differs in the following indicators:

  • Connection of 5 mobile numbers;
  • Free internet service;
  • The built-in microphone allows you to listen to the room;
  • Complete set with a siren;
  • Convenient web interface.

Chinese gsm alarm system for home

Gsm home alarm systems from China are quite popular among consumers due to their low cost, especially when compared with equipment made in Russia and Europe. Customer reviews are varied: there are positive and negative. The disadvantages include the fact that there is no instruction for the device in Russian.

As an example, we can give an alarm for the house G2b, G3b with a motion sensor, door opening, sound siren, built-in battery, remote control. The absence of wires makes installation easy. Suitable for houses, cottages of small sizes. It is possible to additionally install up to 99 various sensors (opening a safe, breaking glass). Communication with the owner is established by mobile phone.

Possibility of using the complex as a telephone for talking with a person inside the premises, who can also call the user of the systems.

The best gsm alarm for home

The choice of the best alarm systems for the protection of a country house includes many subjective factors related to the individual preferences of users. However, the rating of popular manufacturers is headed by Jablotron, Optex, Visonic, LifeSOS, Texecom, Ajax, Strazh. Security devices with a gsm module for the home of the listed manufacturers are considered reliable and of high quality.

In addition, among Russian buyers of complexes for protection, the gsm alarm for a private house Sapsan (China) is popular.

SAPSAN GSM PRO 5S is equipped as standard, suitable for a small country house, apartment. The advantages are delayed arming, as well as automatic arming in the absence of signals from sensors. Adapted to the Russian climate, operates in the temperature range -40⁰ С - +60⁰ С. Supports up to 10 mobile subscriber numbers. Combines wireless, wired alarms (13 wireless zones, 2 wired).

In addition, this manufacturer produces a gsm alarm for the house with a video camera - Sapsan GSM 3G CAM. It uses only a cellular channel as a connection. Equipped with a steel, durable body. Wide temperature range suitable for the Russian climate. A complex with a camera allows you to monitor the situation after an alarm notification of the owner of the object.

The best security system is the one that best suits the characteristics of a particular room or object. It is possible to make the simplest security complex for the house with your own hands. But this requires certain skills and abilities. There are inexpensive standard security systems for sale at an affordable cost (from 4,000 thousand Russian rubles) in all major cities (for example, EKb).

Friends! More interesting stuff:


Scope of application of GSM security alarm systems

One of the options for effective protection is a GSM security alarm for the house, installed indoors and around the perimeter. The principle of operation of such a system is to transmit a signal from the sensor to the telephone of the owner of the dwelling.

An alarm system such as GSM is often used in companies and private buildings, because affordable and has a high level of protection from the actions of intruders. The action of the alarm system is programmed so that the tracking sensor transmits a signal to the central unit. Subsequently, the owner of the house receives an alert on his mobile gadget. These devices have the ability to install additional sensors.

Devices for the protection of a private house can be either purely security or additionally providing fire protection that gives a telephone signal if an unforeseen situation occurs in or near the facility.

The owner of the house receives alarm messages in one of the ways provided by the system:

  • in the form of SMS;
  • by voice communication, that is, by voice message;
  • via GPRS channel providing audio and video information, as well as in the form of MMS.

The standard set of fire and security GSM alarm system consists of the following elements:

  • sensors;
  • a control unit that receives a signal and transmits it via the GSM module;
  • GSM antenna that enhances reception;
  • a spare power supply, consisting of both a battery and batteries;
  • autonomous signaling systems: searchlights, sirens and other devices.

If a scammer enters, as well as a smoke leak, the sensor sends an alarm text message to the property owner's mobile device. This contributes to a quick response on the part of the owner of the house and appeal to law enforcement agencies.

For an apartment

Alarms of this type are often installed by apartment owners. Interest in such devices is explained by the absence of a complex technical complex with a lot of unnecessary options.

You can protect as front door, and balcony with windows. The protection is partial, but functional, especially when it comes to living quarters. and the top and first floors.

As a means of additional protection, it is recommended to install surveillance camera over the canopy of the house and other areas important for the owners of apartments. If we are talking about an apartment on the middle floor, then it is enough to confine ourselves to protecting the front door.

Apartment owners can not only protect housing from third parties, but also be notified of gas leak or smoke in the room, as the sensor also responds to the temperature regime.

Wireless package

Wireless security technologies applicable to the protection of property in homes are constantly being improved. These systems for the protection of residential buildings have a number of features:

However, along with increased reliability, there is also a minus - this is the high cost of signaling. The high price is explained by the complex device and design of the security system.

Today's popular models require filling in contacts, after which the function of sending alarm messages appears. The same steps must be performed in classic wired models, but the functionality in them is much easier than in wireless systems.

The wireless type of GSM alarm system allows a wireless signal between the sensors and the alarm control system. After it is programmed and armed, in this case, SMS will be sent to the owner of the premises.

The wireless security system has a number of advantages over other types of apartment security. These include:

  • the ability to locate sensors at a considerable distance from the remote control;
  • instant transmission of an alarm signal to the owner's mobile device;
  • the signal sent by the sensor to the control panel is encrypted and in order to decrypt it, you need to pick up a billion combinations;
  • the signal stub is completely excluded, since the owner of the equipment will immediately know about it;
  • extensive equipment service area;
  • convenience and ease of installation.

Criterias of choice

Modern stores for the purchase of security devices represent goods for both apartments and country houses, the functionality of the alarm will depend on its purpose.

There are no identical cases, so the choice must be made in accordance with the parameters of the protected object and the desire of the owner of the property.

The first thing to decide is the type of GSM security system: wired or wireless technology. If the owner of the premises has decided on the type, then you need to pay attention to other details that are also of increased importance for the protection of the building.

The type of device, i.e. wired or wireless, refers only to the communication between the sensor and the module, and this factor is not attributed to the signal to the mobile device, since communication with the owner of the house is always wireless.

When choosing a suitable model, you need to pay attention to the following details:

  1. The first thing you need to decide is the possibility or not of connecting the alarm to the electrical network.
  2. Next, the issue of the owner’s desire to install smoke control sensors or the ability to turn on a signal siren, as well as other additional functions, is decided.
  3. It is necessary to determine the number of sensors that will be installed in the residential area and along its perimeter.
  4. It is important to give preference to those models that have simple settings for entering numbers to send an alarm signal.
  5. Type as well as number of strokes for sensors.

For many home owners, there are parameters that affect the comfortable use of the device. This is the presence of feedback, that is, arming and disarming the house, as well as the ability to control additional devices - this applies to heating appliances and water supply systems. If the first option is relevant for all premises, then the second is rarely used and does not attract all owners of residential buildings.

Devices that support plug and play methods include simple security systems. Modern modules require certain skills to enter information. It is preferable to purchase security devices into which information for signal transmission is entered through special computer programs.

Before buying security equipment, you should consult about What temperature range can the device withstand?, which the owner of the premises plans to install in his house and around its perimeter.

Useful video

Watch a detailed video on how to install sensors and set up an inexpensive GSM alarm kit from AliExpress.

Conclusion

Home security should be ensured with the help of security systems. The choice of device depends on the desire of the owner of the home, as well as the type of room and its area. After observing all the parameters for choosing an alarm, you can install a reliable security system for peace of mind for the safety of property and the safety of loved ones.

After installing an alarm in a private house, its owners feel much calmer. Since after that, the level of their safety is significantly increased. There are several types of alarm systems. We will consider further about their features and how to install an alarm system for a private house with your own hands.

Alarm for home - the main components and principle of operation

Studies have shown that more than 55% of violators of the law, having seen an alarm in the house, commit a crime in the form of theft in it. There are a large number of alarm systems that are able to fit the individual characteristics of each of the houses.

In order to install an alarm in the house, there are two ways:

  • do all the work yourself;
  • ask for help from specialized companies dealing with this issue.

Before installing the alarm, we suggest that you familiarize yourself with its main types. Most alarm systems are:

  • wired;
  • wireless.

The first option is practically not used anymore, because due to the large number of advantages, wireless systems are replacing them. A wireless home alarm system is more convenient to use and easier to install than a wired one.

Among the main elements of the alarm system, it should be noted the presence of:

1. Control panels - it is distinguished by the presence of a microchip, which controls the system. In addition, it is the chip or the wires, if the system is wired, that are able to transmit information and control the operation of the alarm system. If third parties entered the premises, then +

2. With the help of this element, a signal is transmitted indicating this.

There are several types of alarms:

  • light, reproduced light, help to activate the attention of neighbors or people who are near the building;
  • sound - the system emits a loud and piercing sound.

It is possible to signal the owner of the house in the form of a message on his cell phone or in a central security post.

Please note that when installing the alarm system yourself, it is not recommended to set up the signal transmission to the security post with your own hands. Since this process is carried out by specialized firms.

3. Devices in the form of sensors - these elements are the most diverse, as they are able to react to various kinds of actions, such as opening a door, the presence of noise, turning on the light, etc. It is recommended that during the installation of the alarm system, take care of the installation sensors that ensure the fire safety of the home. Although the cost of installation work will increase slightly, however, home security will remain at a high level.

In addition, sensors have recently been developed that respond to the presence of high humidity in the house, water leaks, opening windows, etc. The number of sensors installed in the house depends on the financial capabilities of its owners.

4. Devices that are responsible for notifying owners or a security company about violations. Howlers are called sound equipment that is capable of transmitting an alarm signal to the point of its reception.

Types of security alarms for a private house

In relation to the purpose of alarm systems in a private house, they are:

  • security;
  • fire fighting.

The first option performs the function of protecting the house, the facade and the surrounding area from outside intrusion, in turn, the burglar alarm is divided into:

  • vibrational - protects walls from intrusion and from destruction;
  • triboelectric and vibration installations are able to respond to the appearance of vibration or mechanical damage;
  • sensors that monitor the appearance of movement in a protected area - they are able to track and find strangers who have invaded the house, models that are not able to respond to dogs or cats are especially popular;

  • sensors that have a special chart that helps them detect intruders;
  • facade version - sensors that are able to respond to broken glass, attempts to open the door, etc.
  • infrared type sensors or systems - able to recognize movement in a protected area.

The fire-fighting version of the alarm system helps to prevent a fire in the house or in the area near it. There are two types of sensors installed in these systems:

  • thermal type sensors - able to respond to changes in room temperature;
  • smoke sensors - react exclusively to the presence of smoke,

In relation to the control method, security type alarm systems are:

  • autonomous - when the system is triggered, flashlights, sirens and various warning devices are activated, which directly notify about the presence of unauthorized persons in the house, so the system does not have an information transfer point, it notifies about the penetration directly into the house;
  • console-type security systems - are characterized by connecting the alarm to the remote control with centralized supervision, so the signal is transmitted to the security agency, to the owner's phone, to various services.

In addition, there are alarms for the house, according to the type of area that it protects:

  • alarm system located around the perimeter of the house;
  • internal;
  • outdoor.

Each of these options is characterized by the presence of special equipment, which together provides reliable protection for the home.

Features of choosing alarm systems for the home

Before buying an alarm system, first of all, you should determine the control area that needs to be protected. Since each of the elements of the system must ensure the protection of a certain section of the house. When each of the zones is defined, it is easier to control them.

Among the advantages of such a system is the fact that the location of the offender is immediately knocked out, according to the triggered sensor and his location. Among the main elements of this system should be noted:

  • main panel;
  • different kinds of sensors;
  • alarm and warning devices;
  • devices for communication with the system.

There are several types of sensors installed in the system:

  • alarming type - their operation is associated with the opening of a door, window, the presence of movement;
  • service type - able to control the presence of snow, rain, temperature and even wind;
  • internal sensors - monitor water leakage, humidity and gas.

If you correctly install and configure all of the above devices, you will be able to provide maximum protection for your home from hacking and from unforeseen emergencies.

1. The presence of vulnerabilities - the first stage, which involves determining the places of protection and installation of sensors.

2. Determination of the installation location of the control panel is also an important factor, since it is only with its help that you can turn off and regulate the operation of the alarm. It is recommended to install the control panel at the entrance or near the bedroom.

3. To improve the security of the home, preference should be given to alarms that provide round-the-clock surveillance of the entire system.

4. Alarm for a private house with GSM is one of the most popular options, since they are used to organize an excellent system with a home intrusion alert. In addition, messages are delivered directly to the owner's cell phone. The main advantage of such a system is the affordable price of the equipment and the ease of its installation.

Installing a security alarm at home: work technology

If you have purchased a universal alarm system for your home, then its installation will not take much time and will not require a lot of effort. Since this signaling option assumes the presence in one device of all functional parts that provide protection.

In addition, you should take care of the installation of each of the sensors. Their number depends on the area of ​​​​the house and on the number of vulnerabilities that are located in it. In order to avoid false positives of the system, you should properly configure it and select the level of vulnerability. Since, for example, if there are cats or dogs in the house, this should be foreseen earlier and sensors should be purchased that control their movement in the house.

Sensors must be installed on all entrance doors, windows and even vents. Do not install sensors near objects that are moving, such as curtains, if possible.

If you are installing an alarm system with GSM, then you must first select the desired operator and configure the system so that it sends a signal to the phone. It is preferable if this SIM card is used only for signaling, since if other messages or calls come to it, then you may not accidentally hear that the alarm has worked. The PIN code should also not be entered on it. Make sure your phone is always online and charged.

Before starting the installation, we recommend that you first read the instructions from the manufacturer, as a rule, they describe in detail the implementation of each of their processes. Installing an alarm in a private house is a rather complicated process and requires special care, so you should not rush into its implementation. The warranty for GSM equipment is about twelve months, but only if the rules for using this system are observed.

Installation of a house alarm - characteristics and description of the process

To begin with, we propose to consider several milestones at which it is necessary to install sensors:

  • the first boundary is called the sections of windows, doors, vents, that is, sensors that respond to their opening;
  • the second frontier is called motion-detecting sensors, they are based on the presence of movement in the room, there are two variants of such sensors - passive type, cheaper and more practical, microwave - more expensive, but more efficient;
  • sensors installed at the third line react to the breaking of glass on the windows.

After determining the locations of the sensors in the system, the procedure for their installation follows. When choosing mounting locations, try to build on the fact that the sensors should be as invisible as possible. Thus, it will be possible to ensure their maximum efficiency.

If the alarm is wired, then you should determine the location of the wires. To do this, it is best to draw a house project and identify these areas. If the room is being renovated, we recommend hiding the wires inside the walls. The optimal place for the passage of wires is 35 cm from the ceiling. If there is a suspended ceiling in the room, then it is best to hide the alarm under it.

Before you install an alarm at home, we suggest that you familiarize yourself with the main options that will ensure the safety of your home.6

1. The use of private security - this option is good because at any slightest intrusion and an alarm is triggered, a whole security group comes to the call. It is possible to automatically call these services in case of fire or flooding.

However, this alarm system has a rather high cost. You must pay a certain monthly fee for security, as well as pay separately for all calls. In addition, experienced thieves have already learned how to disable such alarm systems.

2. An alarm system that alerts you to the presence of strangers using sound or light. This option is the most popular among the existing types of alarms, as it combines the best cost and performance.

However, for the high-quality operation of such a system, you should make friends with your neighbors so that in the event of an alarm going off, they call you or call the police.

3. Alarm in a private house GSM - an alarm system that notifies the owner of the house about the presence of unauthorized persons in the house by sending SMS messages to the owner. A fairly simple and at the same time effective way to protect your home. Using a mobile phone, the owner of the alarm has the opportunity to monitor the operation of a particular sensor.

4. The simplest and rather primitive version of the alarm, the purchase of a small device that reacts to the appearance of strangers by barking a dog. This device consists of a primitive circuit and a powerful speaker that produces a loud sound. Thus, the robber, under the influence of psychological pressure, leaves the scene of the crime.