home→Pancreas→ Unlock Nokia 1280. We remove the security code from the Nokia phone

Unlock Nokia 1280. We remove the security code from the Nokia phone

If you accidentally forgot the security code of your Nokia phone or somehow blocked your phone, you can use the following instructions. If the phone turns on, you can use it and connects to the computer, then there will be no problems. The Nokia PC Suite program must be installed on the computer; you can download it from the site www.nokia.ru Next, download this program NokiaUnlockerTool. Unpack the downloaded program. Now you need to connect your Nokia phone to your computer with a cable. The phone must be recognized by Nokia PC Suite. After the phone is connected and defined, run the Nokia.exe program from the unpacked archive. Here it is in the photo: Click "connect". In the window on the left, wait until it says "phone connected".
Now we press the "Read code" button (the lowest button) and the code of your phone should appear on the screen.
If the phone is not detected "it is impossible to determine the phone" or there is a protective key lock and when connected to the computer it says "To select the mode, unlock the phone", then it's a little more complicated. And most likely you will have to contact the service center.

Instruction

First of all, you will need a reset code or a firmware reset code. You can get them by contacting the Nokia service center. You can contact him using the contact details located on the website. www.nokia.com. You will need IMEI - a number located behind the back cover under the battery. You can also use the search engine to find codes that are freely available. Keep in mind that using some codes can lead to the loss of data stored on the cell phone, so use only those that come from trusted sources.

If your attempt fails, reflash your phone. To do this, you will need to sync your phone with your computer. Download drivers and software from the website www.nokia.com by selecting your phone model from the list. If the data cable required for flashing is not included in the package, purchase one from a cell phone store. Plug in your phone and make sure the software "sees" the phone.

To flash a phone, you will need the factory firmware responsible for the operation of the phone, as well as software to perform this operation. Use Nokia fan sites like allnokia.ru. With their help, you can find not only the necessary software, but also detailed instructions for your phone model. The best option would be to use a factory firmware that does not contain traces of tampering. Make sure your phone's battery is fully charged, otherwise your mobile may turn off in the middle of an operation. Copy your personal files from your phone to your computer, then update your phone software. After the operation is completed, copy the data back to the mobile.

Sources:

how to remove security code on nokia
2610 Asking for a security code

Nokia phones have a feature called a security code. It is used to protect the data that you consider confidential or simply want to hide from unauthorized persons. In case you have forgotten the security code, you can easily unlock it by following the simple instructions.

Instruction

First of all, contact the Nokia representative office in order to reset the firmware and reset the password codes for your model. There are many different options for codes on the Internet, but no one will take over if yours is damaged as a result of an incorrectly entered code. To prevent this from happening, request an official letter from a company representative.

If you urgently need a code, but no information is received, reflash the phone. In this case, all data will be lost, so use this method only when you are completely tired of waiting for a response from Nokia. In order to flash your phone, you will need to synchronize it with your computer and flash it using special software.

If step number two is difficult for you, or you have neither the time nor the desire to do this, contact a Nokia service center. Regardless of whether your phone is under warranty or not, they can help you with both unlocking and flashing. Do not forget to tell the consultants what exactly you want to do - reset the firmware or simply reset the security code.

The security code is used in most phone models, including Nokia phones. This code is used in order to maximize the safety of the user's personal data when the phone falls into the hands of third parties. But sometimes the owners themselves forget the security code. In this case, one of the ways in which you can unlock the security code will help you.

Instruction

First of all, contact the manufacturer, i.e. to Nokia in order to provide you with all the information on the codes for resetting the settings and the code for resetting the firmware, as well as on the code for unlocking. In this case, it all depends on how you can convince the manufacturer that the phone really belongs to you. Prepare documents confirming the fact of sale and purchase receipt.

After you receive these codes, enter them on the keyboard, depending on what exactly you want to do - erase all personal information and return to factory settings, just reset the settings or remove the phone lock code.

If nothing works for you, reflash the phone. To do this, you will need a data cable, with which you will need to connect your phone to your computer. After that, reflash the phone using special software and firmware that you download from the Internet. After flashing, you will receive a completely clean phone, with factory settings configured and the lock code removed.

Nokia cell phones, like phones from other brands, have a security code to prevent unauthorized people from using the phone. However, if you have forgotten the code, there is a special utility that allows you to remove the security code for inclusion.

You will need

- Mbro USB Nokia Tools Lite.

Instruction

Download Mbro USB Nokia Tools Lite from the Internet. You can find a link to download this program through any search engine - enter the name and press enter, and then follow the links provided. It can also be found on the site softodrom.ru. Check the downloaded files with an antivirus, otherwise you risk introducing a virus into your computer. As a rule, when a file is uploaded, an automatic full check of the file for malicious code or files should occur.

Unpack the downloaded files and run the program. Such software must be installed in the system directory of the local drive. The main program window consists of a message output area and controls located on the right. Connect your phone to your PC by selecting PC Suite mode. To do this, use a miniUSB cable.

Find the item Security Code and click on it with the mouse. The program will display information about , and on the bottom line, following the words Security Code (New Position), the security code of your phone will be indicated. Check the received code by entering a combination of numbers into the phone. This method should be suitable for all Nokia phones running on the BB5 platform. Now remove this code or install such a code that you definitely will not forget /

If you have a phone of a different model, try to find a similar program through a search engine. You may not be able to see the security code, but you can certainly find a utility to remove the code from a mobile phone. There are also some phone models on which it is impossible to view the security codes. To solve such problems, you need to take your phone to a specialized repair center or to a sales center, as consultants in many cases help to cope with such problems.

Related videos

Useful advice

Please check your phone ID when purchasing.

When using Nokia cell phones, you may encounter several types of blocking. The steps to be taken to remove it vary depending on the type of block you are experiencing.

Instruction

Operator lock is designed to prevent the phone from being used on a network other than the original one. Most often, you can encounter it when buying. In this case, you will need to contact the operator under which the blocking was carried out. Provide IMEI- , as well as your data that was provided when purchasing a mobile phone. If you bought the phone from your hands, then you will be required to contact the original owner to find out this data. Request code. Enter it when you turn on the phone with a "foreign" SIM card, thus unlocking your mobile.

The second type of blocking that you may encounter is blocking the phone itself. Nokia mobile phones provide protection in case of loss or theft of the phone - this is a security code that must be entered when the phone is turned on. To reset it, you will need a firmware reset code or a reset code. Of course, you can use the codes that are publicly available on the network, but the most reliable option would be to request them from the official representative of the company in your city or by contacting the contacts posted on the nokia.com website. Provide the IMEI number of the phone, as well as its serial number, and then request the above codes.

SIM card blocking is used to protect such personal data of the subscriber as his mobile number, address book and messages contained in the SIM card memory. When the phone is turned on, a PIN code is requested. If you have forgotten your PIN code and entered it incorrectly more than three times, then you can reset it using the pack code located on the plastic packaging of the SIM card. If this option is not possible, you will need to contact the representative office of your mobile operator to replace your SIM card. Provide your passport details, after which you will be provided with a new SIM card without changing your phone number.

The security code installed in mobile phones is a tool that prevents unauthorized access to your phone's resources. In addition, this code is required to perform some operations with the phone. If you suddenly forgot the code, you can restore it. Consider this situation using the example of the Nokia brand.

Nokia
*#746025625# [*#sim0clock#]
*#92702689# [*#war0anty#]

*#7370925538# (valet code reset) 6230
*#746025625# [*#sim0clock#]
*#92702689# [*#war0anty#]
To access the service menu of the device, dial *3001#xxxxx#, where xxxxx is the security code (security code), which is 12345 by default. Thus, to enter the menu, you will need to dial *3001#12345# In this mode, for example , you can change the name of the network operator displayed in the standby mode. To do this, select NAM1, scroll to the Alpha Tag sub-item, change it as desired (for example, write Vovochka and press OK. Exit the mode by turning off and on the phone.
It is possible that this code works on other phone models (51xx, 61xx).

*#0000# - birthday and software version of the phone
* # 06 # - imei on many phones
* # 92702689 # - some kind of * twisted menu - I don’t know why
* # 3370 # and * # 3370 * - on and off the quality of communication - like that, but this crap is not supported by all operators. Nokia itself had v 5.79 flashed

service code NOKIA 5120&5125:
In addition to the above, there are a couple more SERVICE CODE
1) *#639#(*#NEW#) is used to add a number, i.e. you can register several phone numbers and switch between them.

2) *#92772689#(*#WARRANTY#)
1) Serial number
2) Release date
3)Date of reprogramming
4) Date of last repair.
5) Includes data transfer
6) Total talk time.

3) *#837# or *#VER# phone version (not supported by all models)

4) *#9999# or *#6120# softa version (not supported by all models)

before changing anything in the settings
WELL THINK IF YOU CAN RETURN THEN EVERYTHING TO THE PLACE
PARTICULARLY IN POINT 1
It is not possible to change the name of the operator on all NOKIA models in the latest models, this feature is blocked by the manufacturer.
the only (almost) plus of this service code * # 3001 # 12345 # is the ability to recover the "Forgotten" password to turn on the mobile.
And the second plus - you can see the level of the received signal.
NOKIA 2110
Show EMEI number *#06# >
Show phone software version *#9999# > or for 2110i *#170602112302# > or *#682371158412125# >
Show phone production date *#3283# >

3110
Show EMEI number *#06# >
Shows software version *#3110# >
Restores factory settings *#7780* >
Entering the special menu *#92702689# > Commands in the special menu:

5110
To reduce electricity consumption, you can turn off the EFR (Enhanced Full Rate) # 3370 # >
To enable the EFR function *3370# >
To reduce the battery discharge rate and enable the HR (Half Rate) function *4720# >
To enable the HR function #4720# >
To disable SP encodings (provided that the device's PIN code is enabled): When prompted for a PIN code, press "C", then - "arrow up" or "arrow down". Press "C" until the display is clear. Then enter the command to change the PIN code, but do not actually change it - **04*PIN*PIN*PIN# > The only problem is that this procedure will have to be repeated every time the device is turned on.

6110
To reduce electricity consumption, you can turn off the EFR (Enhanced Full Rate) # 3370 # >
To enable the EFR function *3370# >
To reduce the battery discharge rate and enable the HR (Half Rate) function *4720# > then turn the phone off and on again.
To enable the HR function #4720# >
To view IMEI number *#06# >
Show software version *#0000# >
Entering the special menu *#92702689# > Commands in the special menu:
6232 OK shows the month and year of manufacture
7332 OK shows the date of the last change in the program
7832 OK shows sale date (if entered)
37832 OK, you can enter the date of sale MMYY (careful! cannot be changed later)
9268 OK shows serial number (IMEI)

7110
View firmware version *#0000# >
View IMEI *#06# >
Entering the service menu: * # 92702689 # > By successively pressing down you will see after IMEI:
1 IMEI (International Mobile Equipment Identification)
2MM/YY (release date)
3 Date of purchase (here you can enter the date of purchase if your phone is new. Remember that the date is entered once and if you entered the wrong date, then it will be impossible to correct it later!
4 Date of repair (if repair was carried out)
5 Date handed over to user? ATTENTION: to exit this mode, you must turn off and then turn on the device.
Checking if the card supports SIM-clock-stop mode (only for firmware version 5.24 or later) *#746025625# >
Enable Enhanced Full Rate Codec (EFR): *3370# > will be enabled after phone reboot (uses more power) Disable Enhanced Full Rate Codec (EFR): #3370# > and EFR will be disabled after phone reboot
Enable Half Rate Codec: (only available for firmware version 4.33 or earlier) enter *4720# >and Half Rate mode will be enabled after phone reboot Disable Half Rate Codec: enter Enable #4720# >and Half Rate Codec will be deactivated after phone reboot

Smartphones

* # 06 # - IMEI of the smartphone (IMEI number - consists of 15 digits, it is unique and every phone has it). This number must match the number on the box.
*#0000# - firmware number
safe mode ("PENCIL"+Power)
*#7780# - restore original (working) smart settings
*#7370# - reset smart to factory settings (i.e. all software, contacts, calendar, etc. are deleted - smart becomes clean!)
ATTENTION! To use the last two codes, you will need to enter the phone lock code (default 12345)!
Safe Mode when you turn on the phone - "PENCIL" + "Power Buttion"
Loading in Safe:
1. Turn off your phone
2. Press "PENCIL" (and DO NOT release)
3. Press the power button
4. Hold the "PENCIL" until the FULL load!!!
*#2820# - unique address of your device's Bluetooth module (may be needed by other devices that can't display names).
*#7370925538# - cleaning "Wallet" (for 6600 and above - which have "Wallet").
*3370# (phone must reboot) improves sound quality (using EFR) but reduces battery life.
#3370# - resets the sound quality to normal (cancels *3370# code).
EFR CODEC (Enhanced Full Rate)
This feature, when enabled, should, in theory, significantly improve the quality of the transmitted speech, but, unfortunately, it must be supported by the mobile operator. When it works, the power consumption of the phone in talk mode slightly increases (about 5%). As far as we know, none of the Russian mobile operators support this feature. The principle is based on a different speech compression algorithm (ACELP) and occupies a wider frequency band.
*4720# - enable Half Rate Codec (HFR)
#4720# - disable Half Rate Codec (HFR)
HR CODEC (Half Rate)
Significantly degrades the quality of speech, but saves the battery by about 30%. Again, must be supported by the cellular operator.
*#92702689# - enter the service menu [*#war0anty#]

Secrets of NOKIA 6600 and other Smartphones

*#06# - smartphone IMEI

*#0000# - Firmware number

* # 7780 # - Restoring the original (working) settings of the smartphone

* # 7370 # - Reset the smartphone to factory settings (all software, contacts, calendar, etc. are deleted - the phone becomes clean)

*#2820# - Bluetooth code (unique address of the Bluetooth module)

*#7370925538# - cleaning "Wallet" (for 6600 and above - and which have "Wallet").

Safe Mode when you turn on the phone - "ABC" + "Power Buttion" (in 3650 "ABC" is "pencil")

Loading into Safe:

1. Turn off your phone
2. Press "ABC" (and DO NOT release)
3. Press the power buttons
4. Hold "ABC" until the phone is FULLY loaded !!!

And here is another additional way to format the phone (with the loss of all data), in case you cannot even dial the coveted code * # 7370 # or even start the phone: in the off state, hold down three keys at the same time, green for answer, asterisk and key "3". And now turn on tryby without releasing the keys. Formatting will start.

To use the codes *#7780# and *#7370#, you will need to enter the lock code (default 12345).

##002# cancel all redirects.

**004*number# enable forwarding of all calls to the entered number.

Secrets of NOKIA 3210, 3310, 3330, 8210, 8250, 8850, 9110

Shows the serial number of the phone (IMEI)
*#06#

Software Version
*#0000#

1 line - Version
2 Line - Date of release of the program. providing.
Line 3 - Phone type.

Warranty codes:
*#92702689# (= *#war0anty#)
You will be prompted to enter a "warranty code" type,

The service menu will appear on the screen:
IMEI (International Mobile Equipment Identification)
Phone release date MM/YY
Phone purchase date
Date of repair
Pass user data?

*3370# - Activation of the full-size coding mode (Increases the quality of communication, reduces battery life)

#3370# - Deactivation of the full-size encoding mode.
Note: After entering these codes, the phone will restart with the new settings.

Check if you can stop SIM Clock:
*#746025625# (= *#sim0clock#)

Codes for determining whether LOC is installed on the device or not
Your Nokia can be blocked by 4 types of locks:
SPROVIDER-LOCK - 1
NETWORK-LOCK-2
COUNTRY-LOCK - 3
SIMCARD-LOCK - 4

To check the status of these locks, enter the line:
#pw+(MASTERCODE)+(y)# where
- p = press * 3 times
- w = press * 4 times (in the original, on the contrary, w - 3 times, p - 4)
- + = press * 2 times
- MASTERCODE = exactly the thing that locked your device. But to check the status, enter 1234567890
- y = number from 1 to 4

If the phone is locked by an SP (Service Provider) code that is unknown, then try the following:

1. Pin code request must be enabled;
2. turn on the phone;
3. when prompted for a Pin code, press C, then the up or down arrow;
4. press C and hold until the display clears;
5. now enter the command to change the Pin code, but without changing it;
**04*Pin*Pin*Pin#
This operation must be repeated each time the machine is turned on.

Half Rate Codec:
Inclusion:
*4720# - Half Rate will be activated after the phone is rebooted (power consumption decreases)
Shutdown:
#4720# - Half Rate will be disabled after rebooting the phone
Enhanced Full Rate mode allows you to get much better sound quality with the same number of bits of transmitted information, but loads your provider's network more, while the duration of the conversation is reduced by about 5%

Half Rate mode degrades the sound quality, but unloads the network and allows the provider to pass more calls through it, while the duration of the conversation increases by about 30%

Security code Information in IMEI (International Mobile Equipment Identity) contains:

XXXXXX XX XXXXXX X
TAC FAC SNR SP

TAC = Type Approval Code (2 first digits = country code).
FAC = Final Assembly Code (For Nokia FAC=10).
SNR = Serial number.
SP = Spare (always SP=0).

**04*oldPIN*newPIN*newPIN# - Change PIN code

**042*oldPIN2*newPIN2*newPIN2# - Change PIN2 code

**05*PUK*newPIN*newPIN# - Unblock PIN code

**052*PUK2*newPIN2*newPIN2# - Unblock PIN2

*#35# - Check the blocking status of all incoming calls

**35*code# - Activate blocking of all incoming calls

#35*code# - Disable blocking of all incoming calls

*#33# - Check the blocking status of all outgoing calls

**33*code# - Activate blocking of all outgoing calls

#33*code# - Disable blocking of all outgoing calls

*#330*code# - Check the blocking status of all calls

**330*code# - Activate blocking of all calls

# 330 * code # - Disable blocking of all calls

Nokia code function

*3370# This Nokia code activates Enhanced Full Rate Codec (EFR) - Your Nokia cell phone uses the best sound quality but talk time is reduced my approx. five%
#3370# Deactivate Enhanced Full Rate Codec (EFR) .
*#4720# Activate Half Rate Codec - Your phone uses a lower quality sound but you should gain approx 30% more Talk Time.
*#4720# With this Nokia code you can deactivate the Half Rate Codec.
*#0000# Displays your phones software version, 1st Line: Software Version, 2nd Line: Software Release Date, 3rd Line: Compression Type .
*#9999# Phones software version if *#0000# does not work.
*#06# For checking the International Mobile Equipment Identity (IMEI Number) .
#pw+1234567890+1# Provider Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).
#pw+1234567890+2# Network Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols) .
#pw+1234567890+3# Country Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols).
#pw+1234567890+4# SIM Card Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols) .
*#147# This lets you know who called you last (Only vodofone).
*#1471# Last call (Only vodofone) .
*#21# This phone code allows you to check the number that "All Calls" are diverted to.
*#2640# Displays phone security code in use .
*#30# Lets you see the private number.
*#43# Allows you to check the "Call Waiting" status of your cell phone.
*#61# Allows you to check the number that "On No Reply" calls are diverted to .
*#62# Allows you to check the number that "Divert If Unreachable (no service)" calls are diverted to .
*#67# Allows you to check the number that "On Busy Calls" are diverted to
*#67705646# Phone code that removes operator logo on 3310 & 3330
*#73# Reset phone timers and game scores.
*#746025625# Displays the SIM Clock status, if your phone supports this power saving feature "SIM Clock Stop Allowed", it means you will get the best standby time possible .
*#7760# Manufacture code.
*#7780# Restore factory settings.
*#8110# Software version for the nokia 8110.
*#92702689# Displays - 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of last repair (0000 for no repairs), 5.Transfer User Data. To exit this mode you need to switch your phone off then on again.
*#94870345123456789# Deactivate the PWM-Mem.
**21*number# Turn on "All Calls" diverting to the phone number entered.
**61*number# Turn on "No Reply" diverting to the phone number entered .
**67*number# Turn on "On Busy" diverting to the phone number entered .
12345 This is the default security code .
press and hold # Lets you switch between lines.

Input of all "indications" directly one behind the other - without "blanks" (these serve only the better overview).
Code
last change Function/description/information
*# 06 #
12/16/03 Seriennummer/IMEI indicates (actually also a GSM is code - see further below)
*# 0000 #
12/16/03 SW version announcements (e.g. V3.42.1, 16-10-03, Nhl-10)
*# 2820 #
16.12.03 Bluetooth (BT) device address indicate.
xx#
12/16/03 Directory quick access (xx = storage location and afterwards lozenge e.g. 24 #)
A/from key
12/16/03 Short pressing for menu for switching between profiles
menu key
12/16/03 Long pressing for "task manager" - switching between active programs (with "C" key programs can be terminated.)
Menu quick access
01/18/04 Over in the menu e.g. to point 3.1 arrive simply third enter (if the symbol a file is opened is for these and then in it started the first Programm/Icon).
Autostart go around
12/28/03 When switching on of the Handys on to the pin inquiry the key "ABC" (pin) comes the whole time keeps pressed - this is to ignore (allegedly) the autoinitialization programs.
#
02/15/04 Do not switch between different lines (AS)... goes e.g. with Austrian ONE Handys (see nose cunning). I could not try out however also, since I did not have 2 lines on the SIM map.
12345
12/16/03 ... is according to standard set the Nokia nokia-Sicherheitscode.
0000
12/16/03 ... is according to standard those (with Vodafone windshield frame section) set 2te pin and that standard net code/password
With D1 the standard net code is the last 4 numbers of the card number without HLR e.g. 99999234-5/55 - > 2345
0 - for a long time press
10/25/04 If one the "0" in the main menue for a long time presses those homepage of the standard WAP connection is called.

________________________________________ ________________________________________
Caution - starting from here the codes are "dangerous"
*#7370925538#
* # of res wallet #
12/28/03 ... is to be deleted the code around the "wallet"! Input like normal telephone number (not in wallet code inquiry windows).
NOTE! Afterwards the "wallet" is empty, can again be put on however with new code.
*# 7780 #
01/17/04 The "original attitudes" and telephone re-establishes is again started (an appropriate inquiry and it follow before must the sicherheitscode be entered).
NOTE! Afterwards various "attitudes" are away - among other things these:
Points of entrance (Provider dependent points of entrance and attitudes)
Bluetooth attitudes
Favorite
Allocation of the two keys (beside Navi keys) in the main menue
Profiles are "neglected" (as with distribution) - still there however new bell tones, etc. are...
SMS/MMS/E Mail attitudes
Logos and spielstaende (allegedly) also deleted...
Programs, calendars and contacts, etc. not changed...
Also the sicherheitscode remains.
This putting back goes also via menu under "attitudes - general - original telephone once.".
*# 7370 #
01/21/04 Soft format: If the Handy (only telephone memory) formats, puts back the attitudes (see * to # 7780 #) and implements a software RESET. (however still another inquiry comes before.)

This is "only" a soft format... Hard format with "green, 3, *"... see below.
Green*3
01/21/04 Hard format: If the Handy (only telephone memory) formats, puts back the attitudes (see * to # 7780 #) and implements a RESET.
NOTE! If the Akku to 75% are loaded at least, Akku do not only accomplish during the procedure under any circumstances remove! The procedure takes some minutes (approx. 3-4), is absolutely waiting!

Proceeding: Equipment switch off, which keep "green key" (take off) at the same time pressed, "*" and to "3" key and switch the equipment on (the keys thereby keep further pressed)... to "Formatting "on the display appears...
If that does not function, then equipment for 1 hour switch off, Akku so for a long time rausnehmen and try again.
"only" virtual the memory is generally cleared - genuine formatting can take place only in a Nokia service center, if the Fash is deleted there and/or new L.G. is installed.
mixed
12/16/03 * # 92702689 #, then switch - system menu off (goes with me not)

The following code do not fold (with me also):
* EFR0 # (* 3370 #) EFR activate (EFR = Enhanced Full rate Coding - language optimization)
# EFR0 # (# 3370 #) EFR switch off
* HRC # (* 4720 #) HRC switch on (HRC = helped rate Coding - language compression)
# HRC0 # (# 4720 #) HRC switch off
SIM LOCK
12.01.04 Simlock status query: (use "*" the key over "p,w" and "+" indications to enter)
# pw+ 1234567890 +1 # Provider LOCK status
# pw+ 1234567890 +2 # network LOCK status
# pw+ 1234567890 +3 # Country LOCK status
# pw+ 1234567890 +4 # Sim Card LOCK status

The code 1234567890 must be computed with a program e.g. SmartDCT4Calc and/or DCT 4 code Calculator from IMEI, etc...

Info. to Simlock: SIM LOCK makes it for the offerer/network carriers possible, subsidized (verguenstigte) Handys to offer. Thus one makes oneself if necessary punishable if one SIM LOCK deactivated - in addition the warranty can be purged. I take over for it no adhesion or responsibility!

SMS tips
01/27/04 To Tipps & cheat about SMS (with appropriate codes) are immediately in the FAQ list .
For example for the topic: SMS "retard" and/or deferred send, acknowledgment of receipt, reports...
Mark more simply
03/01/04 To Tipps & cheat to the topic "mark" e.g. with SMS entrance.
Over simply to mark simply the "pin" (ABC key) hold some e.g. SMS and move then Jostick down.
call number transmission
01.01.04 * 31 # - ( CLIR - Calling LINE identification Restriction switches on for the general call number transmission )
# 31 # - switch off the general call number transmission
# 31 # [telephone number] - with the next call suppress the own call number (thus temporary)
* 31 # [telephone number] - with the next call transfer own call number (thus temporary)
* # 31 # - status query (of call number transmission)
# 31 * [ telephone number ] - own call number show, although receiving station switched call number suppression on. (is not usually de-energized of the Netz(betreiber).)

* 30 # - switch ( TIE-clip - Calling LINE identification presentation for the announcement on of the call number of the caller )
# 30 # - switch off
* # 30 # - status query

This also partly goes with 6600 via Men: Attitudes - calls - own No. send...

The following codes are not supported by most Netz(betreibern):
* # 76 # - announcement of the call number, under which one reached the calling (not its call number during rufumleitung!) ( COLP - COonnected LINE identification presentation )
*76#-switch on
# 76 # - switch off

* # 77 # - announcement of the call number, under which the caller reached me (not my call number during rufumleitung meinerseits!) ( COLR - COnnected LINE identification Restriction )
*77# - switch on
# 76 # - switch off
Call bypasses (call forwarding)
01.01.04 Bypass code (U):
U=21 always
U=61 retards
U=62 not attainable
U=67 occupations

U=61, 62, 67 can be parallel active

U=21 -> and then no more call signaling overwrites U=61,62 and 67! Service code (D):

D=11 only language
D=12 all data (speed/minutes)
D=13 only fax
D=14 DATEX j (active?)
D=15 teletex (active?)
D=16 only SMS
D=18 all data except SMS
D=19 all services except SMS
D=20 all services

D=22 all synchronous services

D=26 DATA pack exchange on the left of inclusive. PADs
D=27 services thru PADs
D=29 12 Kbps digitally left

** U * [ goal call number ] * D # - bypass switch on
Input without * D means bypass of all services

## U ** D # - switch bypass off (individual bypasses and service code)
Without ** D all services are switched off to bypasses
## 002 # (all bypasses for all service codes switch off)
## 004 # (switch off only U=61, 62, 67 and for all service codes - thus ", not attainable, nonacceptance "occupies)

* # U ** D # - status of the bypasses query:
Input without ** D queries all services and bypasses

Bypass in the speaking and/or fax box: Number in bypass procedure with D=11 and/or 13 enter
Goal call number (e.g. D2-Netz: +49.172 xxx) and Handynummer without preselection (if necessary 172 replaces) enter.

Tap: During switched on rufumleitung "with occupied" being able "to reject" calls by one the red key during "to ring" presses. The caller is then passed on to the goal call number of the occupying bypass (e.g. mailbox).
Type for waiting period during rufumleitung 61: ** 61 * [ goal call number ] * 11 * [ time in sec. (5 to 30) ] #

This also partly goes with 6600 via menu: Attitudes - rufumleitungen -...
Knock/stops/parks/faults
01.01.04 Knocks is signaling a secondary call during a current discussion
*43# - switch on
# 43 # - switch off
* # 43 # - status query

This also partly goes with 6600 via menu: Attitudes - calls - knocking...

0 - reject while the discussion a knocking
1 - discussion terminate, knocking discussion accept
certain discussion (y) terminate 1 (y)
2 - discussion park, knocking discussion accept
certain discussion and new discussion leads 2 parks (y)

0 - caller the busy condition signal

This also partly goes with 6600 via menus existing during the discussion.
call barrier
01.01.04 Possible only if bypass of the service code is switched off.
Check code (S):
S=33 all outgoing transmissions
S=331 outgoing abroad
S=332 outgoing abroad except home
S=35 all arrival transmissions
S=351 all arriving abroad

Special check codes (s) delete:
Switch off only in connection with the procedure
S=330 check code status outgoing & arriving transmissions switch off
S=333 check code status outgoing transmissions switch off
S=353 check code status arrival transmissions switch off Service code (D):
Not all nets support all services
D=10 language and fax (all calls)
D=11 only language
D=12 all data (speed/minutes)
D=13 only fax
D=14 DATEX j (active?)
D=15 teletex (active?)
D=16 only SMS
D=18 all data except SMS
D=19 all services except SMS
D=20 all services
D=21 all asynchronous services
D=22 all synchronous services
D=23 3.1 kHz GSM of language services
D=24 all synchronous POINT tone of POINT DATA inclusive. PADs
D=25 only data (all asynchronous POINT ton of POINT DATA inclusive. PADs)
D=26 data packet exchange links incl. PADs
D=27 services thru PADs
D=29 12 Kbps digital link

*S**D# - einschalten der Anruf-Sperre
# S * * D # - ausschalten der Anruf-Sperre
*# S# - Status der Anruf-Sperre abfragen

Passwort fur Handy Sperre andern:
** 03 ** * * #
** 03 * 330 * * * #

Dies geht beim 6600 auch teilweise via Menu: Einstellungen - Anrufsperre ...
PIN andern
01.01.04 ** 04 * * * #
** 042 * * * #

PIN entsperren: ** 05 * * * #
PIN 2 entsperren: ** 052 * * * #

Dies geht beim 6600 auch teilweise via Menu: Einstellungen - Sicherheit - Telefon und SIM ...
Diverse Codes
02.02.04 Die folgenden Codes klappen nur in einigen (wenigen) Netzen/Netzbetreibern ... leider z.B. nothing im Vodafone D2 Netz (in Deutschland):
*#100# - Eigene Nummer (Own Number)
*#101# - HLR Number
*#102# - Switch Number
*#103# - Zeit im Netz (Network Time)
*#104# - Anrufbeantworter Nummer (Voice mailbox number)
*#105# - Switch number
*#147# - Letzter Anrufer (Last Caller)

#646# - Minutes Used: (646 spells "MIN")
*#1345# or *174# - Vodafone Prepaid balance

*78 - Do not disturb - nur in Nord America in GSM und CDMA Netzen moglich
*79 - Cancel (s.o.)

ANDROID secret codes for Nokia 1280

DISCLAIMER: This information is intended for advanced users. It is not intended for ordinary users, hackers or mobile thieves. We will not be held responsible for the use or misuse of this information, including loss of data or damage to equipment. So use these codes at your own risk and for the good of the cause.

Code: - *#*#4636#*#*
This code can be used to get information about your phone and battery. The screen displays the following 4 menus:

* Phone Information
*Battery Information
* Battery history
* Usage statistics

Code: - *#*#7780#*#*
This code can be used to reset factory settings. It will remove the following things:

* Google account settings that are stored in your phone
* System and application data and settings
* Downloaded apps

This will NOT delete:

* Current system software and related applications
* SD card files such as photos, music files, etc.

PS: After you enter this code, you will see a window prompting you to click the "Reset Phone" button. Thus, you get the opportunity to cancel your operation.

Code: - *2767*3855#
Think before entering this code. This code is used for factory reset. It will delete all files and settings including internal memory. It will also reinstall the phone's firmware.

PS: Once you enter this code, you will not be able to cancel the operation until you remove the battery from the phone. So think twice before entering this code.

Code: - *#*#34971539#*#*
This code is used to get information about the phone's camera. Shows the following 4 menus:

* Upgrade camera firmware in image (do not touch this option)
* Update camera firmware on SD card
* Get camera firmware version
* Get firmware update counter
A WARNING. Never use the first option, otherwise your phone's camera will stop working and you will need to take your phone to a service center to reinstall the camera firmware.

Code: - *#*#7594#*#*
This code can be used to change the behavior of the End Call/Power button on your phone. By default, if you long press the button, a screen will appear asking you to select any option from Silent Mode, Airplane Mode, and Power Off. You can turn on direct shutdown by pressing this button, so as not to waste time choosing.

Code: - *#*#273283*255*663282*#*#*
This code opens the file copy screen where you can backup your media files such as photos, audio, video and voice memos.

Code: - *#*#197328640#*#*
This code can be used to enter service mode. You can run various tests and change settings in service mode.

WLAN, GPS and Bluetooth Test Codes:
*#*#232339#*#* OR *#*#526#*#* OR *#*#528#*#* - WLAN test (Use Menu button to run various tests)

*#*#232338#*#* - Show WiFi MAC address The MAC address is information about the equipment with which you access the network. As a rule, it is strictly tied to the equipment that provides the connection. If the provider cable is connected directly to a computer or laptop, then we are talking about a network card. If the connection is made using a router or modem, then the MAC address will belong to these devices.

*#*#1472365#*#* - GPS test Nokia 1280

*#*#1575#*#* - Another GPS test Satellite navigation system GPS (Global Positioning System) or the Global Positioning System (location), more precisely, its space segment, is a constellation of 24 satellites. The GPS system (official name - NAVSTAR) was developed by order and is operated by the US Department of Defense. In the 1980s, the system was opened for civilian use. The GPS system works in all weather conditions around the world 24 hours a day.

*#*#232331#*#* - Bluetooth test Nokia 1280

*#*#232337#*# - Shows the Bluetooth device address

*#*#8255#*#* - This code can be used to start GTalk Service Monitor.

Codes for getting information about the firmware version:
*#*#4986*2650468#*#* - PDA, Phone, H/W, RFCallDate

*#*#1234#*#* - PDA and Phone

*#*#1111#*#* - FTA SW Version

*#*#2222#*#* - FTA HW Version

*#*#44336#*#* - PDA, Phone, CSC, Build Time, Changelist number

Codes to run various factory tests:

*#*#0283#*#* - Packet Loopback

*#*#0*#*#* - LCD test

*#*#0673#*#* OR *#*#0289#*#* - Melody test

*#*#0842#*#* - Device test (Vibration test and BackLight test)

*#*#2663#*#* - Touch screen version

*#*#2664#*#* - touch screen test

*#*#0588#*#* - Proximity sensor test

*#*#3264#*#* - RAM version Nokia 1280

STANDARD GSM CODES Nokia 1280
These codes, dialed from a GSM phone, are used to enable and disable various standard features and services. Some of them duplicate menu functions, some do not.

Legend:
@ = send button (Handset, OK, YES, Navi)
** = turn on or activate
* = active
## = disable and deactivate
# = inactive

PIN CODE REPLACEMENT Nokia 1280
Change PIN 1 **04*oldPIN1*newPIN1*newPIN1#@
Change PIN 2 **042*oldPIN2*newPIN2*newPIN2#@
Unblock PIN 1 **05*PUK*newPIN1*newPIN1#@
Unblock PIN 2 **052*PUK2*newPIN2*newPIN2#@

PUK - code that must be provided by the operator when buying a phone or connecting. In the absence of this code, or entering the wrong PUK ten times, your phone will be completely blocked!

SHOW IMEI Nokia 1280
Show IMEI *#06# Translated from English, "IMEI" means: international mobile equipment identifier. As the name suggests, each device must have its own unique "IMEI" that will distinguish it from the rest. When you buy a new phone, you may notice the "IMEI" on the box or even on the store receipt. If you ever take your mobile phone in for repair, there is a chance that the service center will mark your "IMEI" on the warranty card for identification purposes.

If the code received by entering this command and the code on back cover phone does not match, then your phone may be gray.

CALL FORWARD Nokia 1280
Deactivate all types of call forwarding ##002#@
Deactivate all conditional redirects ##004#@
Activate all conditional forwarding **004*phone_number#@

FORWARDING ALL CALLS Nokia 1280
Deactivate and Disable call forwarding to another number ##21#@
Deactivate call forwarding to another number #21#@
Set number and activate call forwarding to another number **21*phone_number#@
Activate call forwarding to another number *21#@
Check the status of call forwarding to another number *#21#@

FORWARDING IF YOU DO NOT ANSWER A CALL
Activate call forwarding to another number if the subscriber does not answer **61*phone_number#@
Deactivate and turn off call forwarding if the subscriber does not answer ##61#@
Deactivate call forwarding if the subscriber does not answer #61#@
Activate call forwarding if the subscriber does not answer *61#@
Check the status of call forwarding if the subscriber does not answer *#61#@

FORWARDING IF THE SUBSCRIBER IS OUTSIDE THE COVERAGE AREA
Activate call forwarding to another number if the subscriber is outside the coverage area **62*phone_number#@
Activate call forwarding if the subscriber is outside the coverage area *62#@
Deactivate and turn off call forwarding if the subscriber is outside the coverage area ##62#@
Deactivate call forwarding if the subscriber is outside the coverage area #62#@
Check call forwarding status if subscriber is out of coverage *#62#@

FORWARDING WHEN THE PHONE IS BUSY
Activate call forwarding to another number if the phone is busy **67*phone_number#@
Activate automatic call forwarding if the phone is busy *67#@
Deactivate and turn off call forwarding if the phone is busy ##67#@
Deactivate call forwarding if the phone is busy #67#@
Check the status of automatic call forwarding if the phone is busy *#67#@

SETTING THE NUMBER OF RINGS BEFORE ACTIVATE FORWARDING
N = 5-30 (seconds)
Set the number of rings **61*VoicemailNumber**N#@
Cancel previous installation ##61#@

Change password for call barring **03*330*oldPassword*newPassword*newPassword#@
Activate the barring of all outgoing calls **33*Password#@
Deactivate the barring of all outgoing calls #33*Password#@
Check barring status of all outgoing calls *#33#@

ALL CALL BAR Nokia 1280
Activate barring all calls **330*Password#@
Deactivate barring all calls #330*Password#@
Check the status barring all calls *#330*Password#@

BARRIING ALL OUTGOING INTERNATIONAL CALLS Nokia 1280
Activate the barring of all outgoing international calls **331*Password#@
Deactivate the barring of all outgoing international calls #331*Password#@
Check barring status of all outgoing international calls *#331#@

BARRIING ALL OUTGOING CALLS Nokia 1280
Activate the barring of all outgoing calls **333*Password#@
Deactivate the barring of all outgoing calls #333*Password#@
Check the barring status of all outgoing calls *#333#@

BARRIING ALL INCOMING CALLS Nokia 1280
Activate the barring of all incoming calls **35*PW#@ or **353*Password#@
Deactivate the barring of all incoming calls #35*PW#@ or **353*Password#@
Check barring status of all incoming calls *#35#@ or *#353#@

BANNING ALL INCOMING CALLS WHILE ROAMING
Activate the barring of all incoming calls while roaming **351*Password#@
Deactivate the barring of all incoming calls while roaming #351*Password#@
Check the barring status of all incoming calls when roaming *#351#@
Activate call waiting *43#@
Deactivate call waiting #43##@
Check call waiting status *#43#@

SENDING or BANING SENDING YOUR PHONE NUMBER WHEN CALLING
Prevent sending your phone number #30#phone_number@
Allow sending your phone number *30#phone_number@
Check the status of sending your phone number *#30#

CODES FOR SENDING/BANNING NUMBER IDENTIFICATION FOR INCOMING CALLS
Prevent the display of the caller's number on your phone *77#
Allow display of the caller's number on your phone #77#@
Check the display status of the caller's number on your phone *#77#@

Questions and comments about secret codes for Nokia 1280

Ask a question about Nokia 1280 secret codes

sysadmin forum.

User information.

Codes for NOKIA 1280

how to unlock security code nokia c2 01.

Posts 1 page 2 of 2.

Creator: Dyachkov_Rasul Specialist Location: Kazan Registered: 2015-01-13 Invitations: 0 Posts: 369 Reverence: Positive: Gender: Male Age: 39 ICQ: 420094 Last visit:

Over the past couple of years, these questions have very often appeared on our portal:

Help people plz unlock zhosky disk after blocking vinlokkerom.

Help me please. I finally have complete bullshit unlock your at t phone.

tell me plzz. unlocked tmobile phone for sale.

Not breathtaking, all new devices, devices, software, etc. every day it becomes more and more difficult, and sometimes it is not clear to a moderate tradesman how to handle it, and it happens that by chance, an ordinary subscriber presses the wrong button, and as a result, these notifications appear.

That's why we made this forum for the sake of solving such problems.

Let's start with the fact that we will need All-unlock v3.0.1 RC4 software. Due to such an accessory, it is really unlock 99.9% of programs, systems, devices, etc. Before the advent of All-unlock v3.0.1 RC4, everyone used the standard search in Yandex or Google. Of course, this has its advantages, but with the growing information on the web, it is becoming increasingly difficult to find the required information. All-unlock v3.0.1 RC4 solves most of the problems with finding and unlocking.

The principle of the program is based on the neural search method, i.e. intellectual search for messages. Even a five-year-old boy can use All-unlock v3.0.1 RC4. Download the software, having passed an easy registration in advance, unpack it to disk C: in the Help folder there is a Faq.txt file on the display of which a thorough step-by-step manual for the upcoming use of the project is written. (If you need to unlock an external device, you may need a cable to connect).

Attention! The program is free and distributed only by our forum, in order to prevent attempts to distribute and sell the program, you will receive a personal code on your phone, which is a password to open the program. Be sure to write it down or memorize it. Do not give the program password to anyone.

With best wishes, leading IT expert Dyachkov_Rasul.

sorry, I wrote in the wrong place, I ask the moderators not to demolish the topic, but to move it to the required section)))

Creator: Dyachkov_Rasul Specialist Location: Kazan Registered: 2015-01-13 Invitations: 0 Posts: 369 Respect: Positive: Gender: Male Age: 39 ICQ: 420094 Last visit:

Here is a small article from the network with a picture, I don’t know if the description fits or how, please don’t judge strictly.

I forgot the security code of the NOKIA C2-01 phone, how to really restore it Children used a different code, they can’t remember the asterisks, the grids are not entered - I forgot the security code on the Nokia C2-01 phone, now I can’t turn on the phone - dig on the Internet and look for the factory code for your phone , which one corrects all the settings to the standard ones, how to find it on the net, pull out the SIM card, start the phone, dial this Nokia C2-01 codes for a mobile phone. To access the device's warranty menu, dial 3001xxxxx, where xxxxx is the security code (security code) , which is 12345 by default. How real unlock protective the code mobile phone Nokia 1280 Nokia c3 phone, forgot the security code, how to unlock it How to unlock Nokia x1-01 I forgot my security code Nokia C2 01 how to remove the security code (video) - Security code nokia c2 01. I have a c2-01 phone. can't unlock it C2-01 (Mobile phone C2-01) Stay connected anytime and anywhere with support for 3G nimble internet access. Codes for mobile phone Nokia C2-01. How to unlock nokia phone code. Protective the code is used in many phone models, including Nokia phones. This code is used in order to maximize the saving forgot the security code nokia c2-01 url Internal Service Software 2011.8.5.

I apologize if I posted it in the wrong place, I ask the bosses not to preserve the topic, but to move it to the required section.

Short description

I forgot the security code on nokia 1280. asks: I forgot the security code on nokia 1280. I forgot the security code - a problem with the Nokia 1280 cell phone. Forgot protective nokia code 1280 please tell me how to unlock nokio. How to unlock Nokia 1280 phone? How to unlock the program gives a code for How to unlock nokia 1280? How unlock Nokia 1280? How to unlock How to unlock Nokia 1280. The security code can only be removed from series phones. Nokia 1280 Unlock (Unlock), Russification. How to unlock a phone for everyone forgot the security code on Nokia 1280. Nokia: how to remove the security code? Unlock your Nokia phone by IMEI. Calculate mastercode for nokia phones for free.

This post discuss about couple of methods that you can use to reset your Nokia 1280 phone’s security code. These methods include:

key combination
short code to reset code
full reset through settings method
full reset through unlock code without sim

Every Nokia phone comes with default code 12345. If you care about security of your phone or personal information like contacts, photos or anything important that you put on your handset, this code can be essential.So it's important change default code & uses it for security. But lots of people tend to forget this code because they don't use it so often.

Below are some of the solutions for this problem.

First method:

Make sure your device is on.
Next press and hold * key + 3 key + Call button + Power button until you see the Nokia logo.
Now enter your lock code.

Second method:

Power on the device.
Then type this code: *#7370#
Now enter your lock code.
* The default lock code is 12345
Then your phone will reset and restart.

Third Method:

Press Power button until your phone is on.
Then navigate to Menu -> Settings -> Restore Factory Settings.
Now enter your security code.
* The default code is: 12345
After that your cell phone will restarts.

Forth Method:

PLEASE NOTE: WHEN ENTERING A CODE, be very careful, Nokia models only allow 3 attempts to enter a code, after this they will lock themselves.

General Information about your Nokia 1280 unlock code

When you receive your email with your unique Nokia 1280 unlocking codes, you may see there"s actually more than one code.

Depending on your model you may receive two codes for newer phones or seven codes for older Nokia models
(Please see below for some examples)
If you receive a code without the #pw+ at the beginning or EG +1# at the end, then you need to add this to the code before you enter it.
For example, if you receive 418636523456123, then the code is actually #pw+418636523456123+1# (Should normally be +1# on the end).

To determine which model type do you have,

open back cover of the phone
pull out battery

there you will see information about your phone
Model, Type, IMEI etc

How to enter your Nokia unlocking code

Use the * (Star) Key to get the p w and + characters.

Press * key 3 times for p
Press * key 4 times for w
Press * key 2 times for +

Please note: You only have 3 attempts to enter this unlocking code.

Nokia DCT4 Models (Older phones)

The phone will now unlock.

Note: Use the codes ending with either +1#, +7# or even +5#.

Models: Nokia DCT3 (Oldest)

Turn on your phone without a SIM Card in it
Enter the unlocking code # p w + YOUR_CODE_HERE + 1 #
The phone will now unlock.

Note: Use the codes ending with either +1# or +2# only.

Nokia 1280 unlock code examples

Examples for Nokia phones (DCT)

# P W + 418636523456123 + 1 #
#PW+447313183456123+2#
#PW+928488673456123+3#
#PW+107081713456123+4#
#PW+569525293345612+5#
#PW+724068043456123+6#
#PW+146860153456123+7#